PERC components

PERC components

Heterojunction Bifacial Module

>
<
JGDM132 MC ONO BIFACIAL PERC
645W~670W

Feature

  • 210mm Wafer

    Based on 210mm wafer, 12 bus-bar N-Type bifacial HJT half cut cell

  • 670W Power

    Module power up to 670W, Moule efficiency up to 21.57%

  • MBB

    Use super MBB half-cut Cell technology to minimizes micro-crack impacts and no-cutting loss on modules.

  • High power generation

    25% higher front side power than conventional modules, up to 20% more power from backside

  • Heavy Show

    Heavy Show Load Up To 5400 Pa, Wind Load Up To 2400 Pa

  • lower shadows

    Better shading tolerance

  • No Bo-lid

    No BO-LID,excellent anti-LeTID & anti-PID performance. Low power degradation,high energy yield

Parameters

  • Power Class in STC
  • Mechanical Specification
  • Properties of System Design
  • Temperature Coefficients
  • Warranty
Model JGDM132-645 JGDM132-650 JGDM132-655 JGDM132-660 JGDM132-665 JGDM132-670
Power Tolerance(0~+ 5W) STC NMOT STC NMOT STC NMOT STC NMOT STC NMOT STC NMOT
Pmax (W) 645 488 650 492 655 495 660 499 665 504 670 574
Vmp (V) 37.68 34.9 37.88 35.10  38.08 35.2 38.28 35.4 38.48 35.6 38.68 40.43
Imp (A) 17.12 13.98 17.16 14.01 17.21 14.05 17.25 14.1 17.29 14.16 17.33 14.19
Voc (V) 44.75 42.7 44.95 42.9 45.15 43 45.4  43.2  45.55 43.4 45.75 46.37
Isc (A) 18.04 14.75 18.1 14.79 18.16 14.83 18.19 14.87 18.25 14.91 18.31 15.06
Panel Eficiency (%) 20.76 20.92 21.09 21.25 21.41 21.57
STC:Irradiance1000 W/m²,25℃,AM 1.5 Spectrum NMOT:Nominal Module Operating Temperature,with irradiance 800W/m²,AM 1.5 Spectrum,20℃,wind speed 1m/s
Solar Cell Type 132 half-cut,mono,PERC
Module Dimensions(mm) 2384×1303×35
Module Weight 38.5
Front Cover Solar glass,2.0mm,with anti-reflective surface
Back Sheet Solar glass,2.0mm
Frame Anodized aluminum
Junction Box 3 diodes,IP68 rated,in accordance with IEC 62790
Cables PV cable 4mm²,0.3m length,in accordance with EN 50618
Connectors MC 4-Evo2,in accordance with IEC 62852,IP68 rated only when connected
Packing 31 pieces/Pallet,558 pieces/40'HQ Container
Maximum System Voltage (V) 1500
Maximum Series Fuse Rating (A) 18
Max. Test Load +/- (incl. Safety Factor of 1.5) (Pa) 5400/2400
Fire class according to EN 13501-1 CLASS C (EN13501-1)
Operating Temperature (℃) -40 to +85
Temperature coe ficient of Isc +0.033%/℃
Temperature coeff cient of Voc -0.234%/℃
Temperature coefficient of -0.259%/℃
Nominal Module Operating Temperature(NMOT) 43±3/℃
Product Warranty(Y) 12
Power Warranty(Y) 30
Power after 1 Year ≥98.5% of nominal Power
Annual Degradation(%/Y) 0.5
Power after 30 years ≥85% of nominal Power

Successful Cases

Relying on solar PV, the world's leading green energy solution, we can achieve a highly integrated green power + green hydrogen solution, replace traditional energy sources with hydrogen, and using hydrogen to achieve decarbonization in various technological processes.
Learn More
New HJT Storage and Charging Intelligent Power Station
New HJT Storage and Charging Intelligent Power Station Su'Zhou,Jiangsu China
≈1,475Tons
25-year Emission Reduction
New HJT Storage and Charging Intelligent Power Station
New HJT Storage and Charging Intelligent Power Station Su'Zhou,Jiangsu China
≈1,475Tons
25-year Emission Reduction
New HJT Storage and Charging Intelligent Power Station
New HJT Storage and Charging Intelligent Power Station Su'Zhou,Jiangsu China
≈1,475Tons
25-year Emission Reduction

FAQ

  • Why was the JG SOLAR product developed?
    Assembled with multi-busbar PERC cells, the half-cell configuration of the modules offers the advantages of higher power output, better temperature-dependent performance, reduced shading effect on the energy generation, lower risk of hot spot, as well as enhanced tolerance for mechanical loading.
  • Why was the JG SOLAR product developed?_copy
    Assembled with multi-busbar PERC cells, the half-cell configuration of the modules offers the advantages of higher power output, better temperature-dependent performance, reduced shading effect on the energy generation, lower risk of hot spot, as well as enhanced tolerance for mechanical loading.
  • Why was the JG SOLAR product developed?_copy
    Assembled with multi-busbar PERC cells, the half-cell configuration of the modules offers the advantages of higher power output, better temperature-dependent performance, reduced shading effect on the energy generation, lower risk of hot spot, as well as enhanced tolerance for mechanical loading.
  • Why was the JG SOLAR product developed?_copy_copy
    Assembled with multi-busbar PERC cells, the half-cell configuration of the modules offers the advantages of higher power output, better temperature-dependent performance, reduced shading effect on the energy generation, lower risk of hot spot, as well as enhanced tolerance for mechanical loading.
  • Why was the JG SOLAR product developed?_copy
    Assembled with multi-busbar PERC cells, the half-cell configuration of the modules offers the advantages of higher power output, better temperature-dependent performance, reduced shading effect on the energy generation, lower risk of hot spot, as well as enhanced tolerance for mechanical loading.
  • Why was the JG SOLAR product developed?_copy_copy
    Assembled with multi-busbar PERC cells, the half-cell configuration of the modules offers the advantages of higher power output, better temperature-dependent performance, reduced shading effect on the energy generation, lower risk of hot spot, as well as enhanced tolerance for mechanical loading.

Customer Service

JG Solar has focused on providing a globalized service for our customers, to establish a fast and efficiency service group with multi levels and channels.

Contact Us
Address:No.168 Caizi Road, Wujiang Economic Development Zone, Suzhou City, Jiangsu Province|Tel: +86(0)512-6311-8860 |E-mail: service@jgsolar.cn
Copyright © JG SOLAR- all rights reserved Su ICP No. 2022016084 Technical Support:Web design
Live Chat
Name
Telephone
Mailbox
Content
Chat